Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-739 - Manual (Page 12)

PNEG-739 42" - 48" Platforms & Safety Cages 12
42'' Head Service Platform
1
Place the side toeboards next to the head as-
sembly on top of the support channels as shown
in Figure 1-2. The end platform support channel
must be placed below the two side toeboards.
Attach the toeboards to the support channels with
the 5/16" x 1" hex bolts supplied. Tighten all hard-
ware in this assembly.
FIGURE 1-2
Inside Toeboards
Toeboard Channel - 98.068"
End Platform Support Channel - 32"
FIGURE 1-2
Support
Channels