Grain Systems Tanks PNEG-1461 - Manual (Page 83)

13. Legs and Leg Bracing
PNEG-1461 12', 15', 18' and 21' Bulk Feed Tank Series and Grain Hopper Tank Series 83
Installation of Leg to Sidewall
Figure 13D
Use 5/16" x 1" bin bolts and nuts when attaching the leg to base. Make sure the washer is used on the
slot side of the leg.
When installing legs to sidewall, reverse normal insertion procedure on bolts. Place hex head and
neoprene washer to inside of sidewall, leaving threaded portion of bolt protruding outward. This
provides for a weather-tight seal at the leg attachment location. (See leg size chart
on Page 86 before
attaching legs.)
Figure 13E
Ref # Description
A 5/16'' x 1'' Bin Bolt
Leg
Insert bolts from inside to
outside on all leg to tank
connections.