Grain Systems Tanks PNEG-1461 - Manual (Page 79)

12. Hopper Assembly
PNEG-1461 12', 15', 18' and 21' Bulk Feed Tank Series and Grain Hopper Tank Series 79
Hopper Sheets (Continued)
Figure 12F 22" Hopper Collar Detail Figure 12G 16" Hopper Collar Detail
NOTE: Every hole in hopper sheet will be utilized. Use 5/16" x 3/4" truss head bolt on hopper seams.
(Truss head goes on inside of hopper.)
Inside of tank
Inside of tank
Ref # Description
A 5/16" x 3/4" Truss Head Bolt
B Flange Nut
C 22" Hopper Collar