Grain Systems Tanks PNEG-1461 - Manual (Page 113)

16. Parts List
PNEG-1461 12', 15', 18' and 21' Bulk Feed Tank Series and Grain Hopper Tank Series 113
* NOTE: Bolt listed first and nut second for each usage.
15' Diameter 45° Hopper Bin Hardware Specifications Parts List
Ref # Part # Description Qty
1 S-10260
Bulk Tank Peak Ring to Roof Panels (Use 5/16" x 1" Hex Head Bin Bolts and
5/16" Hex Nuts.)
36
1 S-7484 36
2 S-10260
Roof Panel to Roof Panel (Use 5/16" x 1" Hex Head Bin Bolts and 5/16" Hex Nuts.)
414
2 S-7484 414
3 S-10260
Roof Panels to Top Sidewall Sheets (Use 5/16" x 1" Hex Head Bin Bolts and
5/16" Hex Nuts.)
180
3 S-7484 180
4 S-10260
Vertical Sidewall Sheet Seams (Use 5/16" x 1" Hex Head Bin Bolts and
5/16" Hex Nuts.)
Varies
4 S-7484 Varies
5 S-10260
Horizontal Sidewall Sheet Seams (Use 5/16" x 1" Hex Head Bin Bolts and
5/16" Hex Nuts.)
Varies
5 S-7484 Varies
6 S-10260
Leg to Sidewall Sheet (Use 5/16" x 1" Hex Head Bin Bolts and 5/16" Hex Nuts.)
(Bolt Heads to Inside of Tank.)
330
6 S-7484 330
7 S-10260 Hopper Panels to Sidewall Sheet (Use 5/16" x 1" Hex Head Bin Bolts
and 5/16" Hex Nuts.) (Bolt Head to Inside at Leg to Hopper to Sidewall
Connection Only.) 360
7 S-7484 360
8 S-10267
Vertical Hopper Seams (Use 5/16" x 3/4" Truss Head Bin Bolts and
5/16" Flanged Whiz Nuts.) (Bolt Heads to Inside of Tank.)
720
8 S-10268 720
9 S-10267
Hopper Collar to Hopper Panel (Use 5/16" x 3/4" Truss Head Bin Bolts and
5/16" Flanged Whiz Nuts.) (Bolt Heads to Inside of Tank.) (16" Shown.)
36
9 S-10268 36
10 S-7485
Hopper Brace to Leg (Use 3/8" x 1" Flange Head Bolts and 3/8" Hex Nuts.)
3
10 S-7489 3
11 S-7485
Cross Tie Brace to Leg (Use 3/8" x 1" Flange Head Bolts and 3/8" Hex Nuts.)
45
11 S-7489 45
Ref # Description Ref # Description
A Inside H Leg
B Outside I Hopper Reinforcement Angle (Optional)
C Roof Sheet J Leg Cross Tie
D 15' Roof Stiffener Channel K Offset Hopper Panel
E Body Sheet L Hopper Collar
F Peak Ring Collar M Hopper Brace
G Hopper Panel