Grain Systems Tanks PNEG-1461 - Manual (Page 62)

10. Safety Cage
62 PNEG-1461 12', 15', 18' and 21' Bulk Feed Tank Series and Grain Hopper Tank Series
Safety Cage Hoop Assembly
To complete the safety cage hoop installation, some pre-assembly is required. Attach four (4) safety cage
brackets to the extension rails and two (2) safety cage brackets to the second 4' ladder section as shown
in
Figure 10C . See cage hoop bracket detail on Page 63 for proper installation. Next, bolt each set of safety
cage hoop halves together using 5/16" x 1" bolts with the head of the bolt to the inside of the safety cage.
You may now bolt these assemblies to the safety cage brackets. Tighten bolts as you go.
Figure 10C
Ref # Description
A 48" Typical Bottom to Bottom
B Extension Rail
C Cage Hoop Bracket
D Safety Cage Hoop Halves (LDR-4201)
E Ladder Section