Grain Systems Tanks PNEG-1461 - Manual (Page 60)

60 PNEG-1461 12', 15', 18' and 21' Bulk Feed Tank Series and Grain Hopper Tank Series
10. Safety Cage
Ladder System With Safety Cage
Extension Rail Installation
Before the safety cage can be installed, the ladder extension rails must be attached. Start by bolting
the spacer brackets through the top and bottom set of holes in the top ladder section. Then, attach the
extension rail to the spacer brackets as shown in
Figure 10A . When installed correctly, the bottom of the
extension rail should be flush with the bottom of the top ladder section. Use 5/16" x 1" bin bolts for
all connections.
Figure 10A
Ref # Description
A 8' RFB Extension Rail
B Spacer Bracket (LDR-4403)
C Top Ladder Section