beautypg.com

Assembly – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-970 User Manual

Page 25

background image

PNEG-970 S2 Hopper w/ Collector Ring

25

Assembly

1" x 48" flex
conduit

1" flex conduit
coupling

1" conduit
coupling

pivot tube

D. Feed the nine (9) stranded wires from the collector ring through one of the holes in the right

junction box.

E. Connect the 1" x 48" liquid-tight flex conduit assembly to the junction box using the 1" liquid-

tight flex conduit coupling.

3. WIRE THE COLLECTOR RING TO THE SWEEP

A. Attach one(1) 1" liquid-tight flex conduit coupling to each end of the 1" x 48" liquid-tight flex

conduit.

B. Feed the nine (9) stranded wires from the collector ring through the 1" conduit coupling and

1" x 48" liquid-tight flex conduit assembly.

C. Attach the 1" x 48" liquid-tight flex conduit assembly to the pivot tube using the 1" conduit

coupling.

See also other documents in the category Grain Systems Equipment: