beautypg.com

Assembly – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-970 User Manual

Page 22

background image

PNEG-970 S2 Hopper w/ Collector Ring

22

Assembly

3. ASSEMBLE THE CROSSBRACE TO THE HOPPER (cont.)

D. Making sure the lower tube assembly and drilled hole are aligned, bolt the crossbrace to the

hopper using eight (8) 1/2"-13 x 1 3/4" hex bolts, flat washers, lock washers, and hex nuts.

E.

Attach the 1" liquid-tight flex conduit coupling on the conduit assembly to the hopper.

F.

Slide the lower tube weldment against the hopper and tack weld into position.

1/2"-13 x 1 3/4"
hex bolt

hex nut

lock washer

crossbrace
assembly

hopper

See also other documents in the category Grain Systems Equipment: