beautypg.com

Adjusting the vaporizer – Grain Systems PNEG-823 User Manual

Page 25

background image

8. Operating Procedure

PNEG-823 Deluxe Downwind Heater 25

Adjusting the Vaporizer

1. Vaporizer should be adjusted so the vapor pipetrain runs warm to the touch (100°F-120°F).

2. Loosen 5/16" bolt on adjustment bracket.

3. Swivel vaporizer away from flame if running too hot, closer to flame if too cold.

4. Move vaporizer only 1" at a time and allow a few minutes for temperature to equalize.

5. Tighten 5/16" bolt and watch heater run for several minutes to verify adjustment.

Figure 8A Vaporizer Coil Adjustment Positions

See also other documents in the category Grain Systems Conditioners: