Banks Power Dodge Trucks: (Diesel ’03 - 07 5.9L Cummins) Tuner- Six-Gun Diesel Tuner, (325 HP Dodge 5.9L Cummins (24-valve) Trucks) '06-07 Compatible with Optional PowerPDA - Manual (Page 17)

96810 v.7.0
17
4.
Locate the RJ12 cable (similar to
telephone connector) on your Six-Gun
wiring harness and pull enough cable
through to reach the Docking Station.
5.
Route the RJ12 cable to reach the
Docking Station and connect it to the
left most receptacle on the bottom of
the Docking Station.
Note: You may need to remove and or
loosen dash panel or covers to install
the RJ12 cable between dash crevice
or behind dash panels. See Figure 16
WARNING: THE CHARGING CABLE
ON THE DOCKING STATION IS
DESIGNED TO SUPPLY A CONSTANT
LOW-VOLTAGE POWER SOURCE
(+5VDC) TO THE BANKS POWERPDA
AND IS “LIVE” AS LONG AS THE
SYSTEM’S OBD II INTERFACE CABLE
IS COMPLETELY INSTALLED AND
THE RJ12 CONNECTOR IS PLUGGED
INTO THE DOCKING STATION.
Figure 16
Figure 15