Velleman HAMGSM133 User Manual
Page 9
HAMGSM133
V. 02 – 15/05/2012
9
©Velleman nv
Factory reset
Password required
Command RES;pwd
pwd = current password (default = 12345)
Example RES;12345
Enable SMS reception
Password required
Command SMSxxxxxxxx:ON;pwd
xxxxxxxx = position of the number in the list (1~8)
pwd = current password (default = 12345)
Example SMS15:ON;12345
Result
Phone numbers on position 1 and 5 will receive an SMS when input status
changes. Other numbers are not affected. By default all eight phone numbers
receive an SMS.
Disable SMS reception
Password required
Command SMSxxxxxxxx:OFF;pwd
xxxxxxxx = position of the number in the list (1~8)
pwd = current password (default = 12345)
Example SMS27:OFF;12345
Result
Phone numbers on position 2 and 7 will NOT receive an SMS when input
status changes. Other numbers are not affected.
Enable ringtone reception
Password required
Command VOCxxxxxxxx:ON;pwd
xxxxxxxx = position of the number in the list (1~8)
pwd = current password (default = 12345)
Example VOC15:ON;12345
Result
Phone numbers on position 1 and 5 will receive a ringtone when input status
changes. Other numbers are not affected. By default all eight phone numbers
receive ringtones.
Disable ringtone reception
Password required
Command VOCxxxxxxxx:OFF;pwd
xxxxxxxx = position of the number in the list (1~8)
pwd = current password (default = 12345)
Example VOC36:OFF;12345
Result
Phone numbers on position 3 and 6 will NOT receive a ringtone when input
status changes. Other numbers are not affected.
Set logic alarm level to HIGH (alarm when input under tension)
Password
Command LIVx:A
x = 1 (input 1) or 2 (input 2)
Example LIV2:A
Result
Set alarm level on input 2 to high, alarm is activated when input 2 is under
tension. Default both inputs are set to level HIGH.