Velleman HAA2850 - Manual (Page 11)

HAA2850
v4 - 15.11.2013
11
©Ve lleman nv
•
It is recommended to program a different code for every user.
- 4~8 digits
master code
group 1
00 ~ 99
4~8 digits
100 user codes in group 1 for output 1
(with duress code function)
group 2
0 ~ 9
4~8 digits
10 user codes in group 2 for output 2
Configuring output modes
duration
1 ~ 999
output 1 in momentary mode from 1 to 999 seconds
(default: 401 = 1s)
-
output 1 in Start/Stop mode (toggle)
-
output 1 in Start/Stop mode (toggle) with accelerated
code
duration
1 ~ 999
output 2 in momentary mode from 1 to 999 seconds
(default: 501 = 1s)
-
output 2 in Start/Stop mode (toggle)
-
output 2 in Start/Stop mode (toggle) with accelerated
code
Keypad settings
after 10 successive wrong codes the keypad locks for
30s (default)
after 10 successive wrong codes, the duress output
[f] switches to ground
attempts
5~10
after 5 to 10 successive wrong codes the keypad locks
for 15min – use the master code to reset at any time
00
reset above keypad settings
Door forced-open alarm
door forced-open alarm enabled
door forced-open alarm disabled (default)
Output activation announcer
notifying beep (1s) is given to notify the person outside to
open the door when output relay is activated via a user
code or egress button (default)