Velleman HAA2850 - Manual (Page 10)

HAA2850
v4 - 15.11.2013
10
©Ve lleman nv
8. Programming options
The default master code is 0000. Personalize this code as soon as
possible to increase system security.
First time entering programming mode.
Use the master code 0000 to enter programming mode for
the first time.
Set user mode
Set system to single-user mode, clear all previously stored
data and refresh (default). Note: wait ±3s until
confirmation beeps are heard before continuing.
Set system to multi-user mode, clear all previously stored
data and refresh. Note: wait ±3s until confirmation beeps
are heard before continuing.
Set master and user codes for single user mode.
Notes: master code
•
When programming the codes, it is recommended to program the
master code before the user codes.
•
If you are programming a new master code, do not use a
combination that is already taken for a user code.
•
If you have forgotten the master code, you can reset it. See
Resetting the master code in section 9.
Notes: user code
•
Any user code must be different from the master code.
•
It is recommended to program a different code for every user.
4 digits master code
4 digits user code 1 for output 1 (with duress code function)
4 digits user code 2 for output 2
Set master and user codes for multi user mode.
Notes: master code
•
When programming the codes, it is recommended to program the
master code before the user codes.
•
If you are programming a new master code, do not use a
combination that is already taken for a user code.
•
If you have forgotten the master code, you can reset it. See
Resetting the master code in section 9.
Notes: user code
•
Any user code must be different from the master code.