Velleman VDP5RBMH User Manual
Page 8
VDP5RBMH
V. 04 – 07/01/2014
8
©Velleman nv
7.4
DMX Mode
This mode allows you to control the device by any universal DMX controller.
•
All DMX-controlled devices need a digital start address so that the correct device responds to the
signals. This digital start address is the channel number from which the device starts to “listen” to
the DMX controller. The same starting address can be used for a whole group of devices or an
individual address can be set for every device.
•
When all devices have the same address, all the units will “listen” to the control signal on one
particular channel. In other words: changing the settings of one channel will affect all devices
simultaneously. If you set individual addresses, each device will “listen” to a separate channel
number. Changing the settings of one channel will only affect the device in question.
•
In case of the 20-channel mode, you will have to set the start address of the first unit to 1
(CH1~20), the second to 21 (1 + 20) (CH21-40), the third to 41 (21 + 20) (CH41~60), and so on.
The highest start address is 493.
To set the device to work with a DMX controller:
To set the device to stand-alone mode:
1. Press the S button until MODE is displayed and press the E button.
2. Use
3. Press the E button to confirm.
7.5
DMX Channel Values
Channel
DMX value
Description
1 (Colour)
0-4
White
5-8
White + Colour1
9-12
Colour 1
13-17
Colour 1 + Colour 2
18-21
Colour 2
22-25
Colour 2 + Colour 3
26-29
Colour 3
30-34
Colour 3 + Colour 4
35-38
Colour 4
39-42
Colour 4 + Colour 5
43-46
Colour 5
47-51
Colour 5 + Colour 6
52-55
Colour 6
56-59
Colour 6 + Colour 7
60-63
Colour 7
64-68
Colour 7 + Colour 8
69-72
Colour 8
73-76
Colour 8 + Colour 9
77-81
Colour 9
82-85
Colour 9 + Colour 10
86-89
Colour 10
90-93
Colour 10 + Colour 11
94-98
Colour 11
99-102
Colour 11 + Colour 12
103-106
Colour 12
107-110
Colour 12 + Colour 13
111-115
Colour 13
116-119
Colour 13 + Colour 14
120-123
Colour 14
124-127
Colour 14 + Colour 15
128-255
Colour 15
2 (Strobe)
0-3
White