Technical specifications – Velleman VDP5RBMH User Manual
Page 12
VDP5RBMH
V. 04 – 07/01/2014
12
©Velleman nv
6. Detach the cables.
7. Attach a new appropriate lamp (see Technical Specifications) to the cables as shown.
8. Insert the lamp in the holder.
9. Put back the ventilator.
10. Put back the covers.
Set the beam
You can set the lamp's beam wih the screw
next to the lamp.
9.
Technical Specifications
power supply
240 VAC 50/60 Hz
power consumption
350 W
fuse
F 250 V - 3.5 A
lamp in device
160 W R5 (LAMPMSD/5R) (incl.)
IP rating
IP20
beam angle
4°
dimensions
350 x 320 x 505 mm
weight
18.5 kg
spare lamp
LAMPMSD/5R
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our
website www.hqpower.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.