Milton CAT D10T - Manual (Page 3)

3
C27 Engine with ACERT™ Technology
Optimizes engine performance and meets emission regulations.
C27
Performing at full-rated net power of 433 kW (580 hp) at
1800 rpm with a torque rise of 21 percent, the D10T can
doze through the toughest material. Matched to the high
efficiency torque divider and electronically controlled power
shift transmission, it will provide years of reliability.
ADEM™ A4 Engine Controller
The ADEM A4 electronic control module manages fuel
delivery and airflow to get the best performance per liter
(gallon) of fuel used. It provides flexible fuel mapping, allowing
the engine to respond quickly to varying application needs.
MEUI Fuel System
Through the use of multiple injection fuel delivery,
combustion chamber temperatures are lower, generating
fewer emissions and optimized fuel efficiency. This is
accomplished with the MEUI fuel system, which strikes
the proper balance between the precision of the electronic
control system and the simplicity of mechanically controlled
unit fuel injectors. The result is more productivity and lower
fuel consumption.
Air-to-Air Aftercooling
Air-to-air aftercooling provides cooled compressed air
to the engine intake manifold, thus reducing emissions
and maximizing fuel efficiency.
Overhead Cams
Two, single overhead cams are driven by gears on the
flywheel end of the engine. Placing them on the flywheel
end significantly reduces noise and vibration. To reduce wear,
two pendulum absorbers are mounted at the front of the
camshafts. Together, these features contribute to the long-life
and durability of this engine.
Service
Easier maintenance and repair through monitoring key
functions and logging critical indicators. Electronic diagnostic
access is possible with the Cat Electronic Technician.