Milton CAT 777F - Manual (Page 17)

17
Product Safety. Caterpillar has been and
continues to be proactive in developing
machines that meet or exceed safety
standards. Safety is an integral part
of all machine and systems designs.
Integral ROPS Cab. Resiliently mounted
to the frame to reduce vibration and
sound, the integral ROPS structure,
which provides “five-sided protection”
for the operator, is designed as an
extension of the truck frame.
Payload Guidelines. Safety is integral to
maintaining the highest productivity in
mining machine operation. Caterpillar
10/10/20 payload guidelines provide a
reference for managing payloads.
WAVS Camera (optional). An optional
rear vision camera system provides
visibility to the rear of the machine
through an LCD monitor in the cab.
The monitor can be set to activate only
when the truck is in reverse, and the
display is equipped with a sensor to
detect ambient light, which automatically
brightens or dims the display.
High Intensity Discharge (HID) Lights
(optional). Thirty-five Watt HID lights
can replace the standard high beam
65 Watt Halogen lights. The powerful
HID lights are almost two times brighter
and 50 percent more efficient, improving
night time visibility.
Brake Systems. Four corner oil-cooled
braking system provides excellent control
in slippery conditions. The service brakes
and retarding system are actuated by
modulated hydraulic pressure, while
secondary and parking brake functions
are spring applied and hydraulic released.
This reliable and durable system ensures
braking in the event of complete hydraulic
failure. Either the parking or secondary
brake systems on this truck will hold it
on a grade up to 15 percent while carrying
a rated load.
Steering System. A twin, double-acting
cylinder steering system is designed to
deliver precise control under all loading
and underfoot conditions. The steering
hydraulic system is separate from the
main hydraulic system to prevent cross-
contamination and overheating.
Engine Shutoff Switch. A secondary
engine shutoff switch is located at
ground level.
Electrical System Disconnect. A battery
disconnect switch, located directly above
the front bumper, provides ground-level
lockout of the electrical system.
Ladder/Secondary Egress. Wide
stationary stairways and platforms
on both sides of the machines, allow
easy ingress and egress.
A stairway lamp illuminates the cab
access stairs and can be activated at
ground level during entry and shut off
with a switch in the cab.
Standard Safety Features.
• Slip resistant surfaces
• 75 mm (3 in) wide orange three-
point operator restraint
• Heated, wide-angle mirrors
• Body raised indicator
• Guard rails
• Reverse neutralizer when dumping
• Low interior sound level
• Service platform level transmission,
hoist and steering disable switch
• Service platform level starter
disable switch
Safety
Caterpillar machines and systems are designed with safety as the first priority.