Grainsystems STANDARD ALPHA 9MM DA-SA Manual - Manual (Page 25)

24
3
4
5
2
When the firearm is not in use, please install a pistol cable lock prior to storage.
Failure to do so can result in the misuse and handling of the firearm by unauthorized
personnel.
1. Unload the pistol. (See Unloading process on page 15 & 16)
2. Lock the slide to the rear by pulling the slide back and simultaneously pushing the
slidestop lever up to keep the slide in the open and locked position.
3. Using the provided key, open the pistol cable lock and release one end of the
cable from the locking mechanism.
4. Thread the cable through the ejection port and down the magazine well.
5. Place the cable into the locking mechanism and lock the cable into place.
6. Pull the cable to ensure that the cable is firmly locked into position.
LOCK AND STORAGE