Grainsystems STANDARD ALPHA 9MM DA-SA Manual - Manual (Page 23)

5
4
Dry cleaning patch
Barrel swab
3
cleaning patch
with cleaning oil
22
or
NOTE: Perform maintenance after each session the pistol is fired.
1. Fully disassemble the pistol as described in “Pistol Disassembly” on page 17 &18.
2. Assemble the included cleaning brush.
3. Apply gun cleaning solution/oil to a cleaning patch and wrap patch around barrel
cleaning brush.
4. Insert the barrel cleaning brush into the barrel through the chamber and push the
brush through. Repeat until carbon and residue is removed. The included cleaning
swab can also be used to clean the pistol.
5. Use a dry cleaning patch with the barrel cleaning brush or barrel swab to remove
excess gun cleaning solution/oil.
2
MAINTENANCE