Grainsystems STANDARD ALPHA 9MM DA-SA Manual - Manual (Page 10)

HANDLING AND OEPRATION
5
10
15
5
10
15
www.sphinxarms.com
!
WARNING
!
WARNING
1 2
9
Use only new, factory manufactured ammunition in your Sphinx pistol that is the
correct caliber and is SAAMI and/or C.I.P. approved.
Ensure that your ammunition is free of defects, dirt, debris, lubrication, or anything
that may cause malfunctions.
1. With the bullet facing the front of the magazine, insert the rim of the case down into
the follower.
2. Push the round to the rear of the magazine, underneath the magazine lips.
3. Repeat until the magazine is fully loaded.
DO NOT use re-manufactured ammunition. Use of re-manufactured
ammunition WILL void your warranty and may result in severe bodily
injury and severe damage to your pistol.
Be sure to use the appropriate caliber of ammunition and original
Sphinx magazine for your pistol. Failure to utilize the correct ammunition
and orginal Sphinx magazine may result in a malfunction and could
cause severe injury and/or death.
HANDLING AND OPERATION
Ammunition
Loading the Magazine