VEGA VEGAPULS 61 (≥ 2.0.0 - ≥ 4.0.0) Modbus and Levelmaster protocol - Manual (Page 60)

60
11 Supplement
VEGAPULS 61 • Modbus and Levelmaster protocol
41361-EN-121011
11 Supplement
11.1 Technical data
General data
316L corresponds to 1.4404 or 1.4435
Materials, wetted parts with encapsulated antenna system
Ʋ Process fitting PVDF, 316L
Ʋ Process seal FKM (IDG FKM 13-75)
Ʋ Antenna PVDF
Materials, wetted parts with plastic horn antenna
Ʋ Adapter flange PP
Ʋ Seal, adapter flange FKM (COG VI500), EPDM (COG AP310)
Ʋ Antenna PBT-GF 30
Ʋ Focussing lense PP
Materials, non-wetted parts
Ʋ Compression flange PP
Ʋ Mounting strap 316L
Ʋ Fixing screws, mounting strap 316L
Ʋ Fixing screws, adapter flange 304
Ʋ Plastic housing plastic PBT (Polyester)
Ʋ Aluminium die-casting housing Aluminium die-casting AlSi10Mg, powder-coated - basis:
Polyester
Ʋ Stainless steel housing 316L
Ʋ Seal between housing and housing
cover
NBR (stainless steel housing, precision casting), silicone
(aluminium/plastic housing; stainless steel housng,
electropolished)
Ʋ Inspection window in housing cover
(optional)
Polycarbonate
Ʋ Ground terminal 316L
Process fittings
Ʋ Pipe thread, cylindrical (ISO 228 T1) G1½
Ʋ American pipe thread, tapered 1½ NPT
Ʋ Flanges DIN from DN 80, ANSI from 3", JIS from DN 100 10K
Ʋ Hygienic fittings Clamp, bolting according to DIN 11851, Tuchenhagen
Varivent
Weight depending on process fitting and
housing material
0.7 … 3.4 kg (1.543 … 7.496 lbs)
Max. torque, mounting screws - strap on
the sensor housing
4 Nm
Max. torque flange screws
Ʋ Compression flange DN 80 5 Nm (3.689 lbf ft)
Ʋ Adapter flange DN 100 7 Nm (5.163 lbf ft)