VEGA VEGASOURCE 31 - Manual (Page 36)

36
6 Setup
VEGASOURCE 31 •
38131-EN-130415
2
1
Fig. 27: Switching on the radiation with pneumatic switching facility - VEGASOURCE 31 version K L M N
1 Padlock to secure the switching condition - must be removed for operation of the pneumatic switching facility
2 Padlock to secure the source insert - must not be removed with normal operation
Initial situation: Pneumatic changeover is connected correctly. Source
holder is in AUS-OFF position.
•
Remove upper padlock (1)
Note:
The upper padlock must be fixed again for revision purposes (OFF
position) and should be attached to the second padlock for this
period or kept outside the plant.
Warning:
The lower padlock (2) secures the access to the source insert and
must not be removed during normal operation.
•
The pneumatic switching facility can now be operated
Note:
The actual switch condition is visible in the indicating window (ON or
OFF). The other lable is respectively covered.