Revsndlv, Revoicing, Select and edit the revoice parameters – Yamaha PSR-530 User Manual

Page 84: Repeat as required and exit when done, If necessary select a track to revoice

,,,,,,,,,,,,,,,,

QQQQQQQQQQQQQQQQ

Select and Edit the Revoice Parameters

Use the SUB MENU [▲] and [▼] buttons to select the desired parameter.

The name of the selected parameter will appear on the top line of the display
to the right of the parameter’s current value.

Repeat as Required and Exit When Done

Repeat steps

and

, above, to revoice the tracks as required, then press the

[REVOICE] button so that its indicator goes out to exit from the REVOICE
mode.

Use the [–] and [+] buttons, the number buttons, or the data dial to set the

parameter’s value as required. Refer to the “Revoice Parameters” chart on
page 78.

100

RevSndLv

YES

• “- - -” will appear on the top line

of the display if you select a
song track which contains no
data for revoicing, and revoicing
will not be possible.

• Only the Volume parameter can

be revoiced for the ACCOMPA-
NIMENT track. If you attempt to
change any other parameter “- -
-” will appear on the top line of
the display and revoicing will
not be possible.

• If the R1 and R2 voices have

been recorded to a single track,
only the R1 voice can be
revoiced.

• Minus settings for the Octave

and Pan paraneters can be di-
rectly entered by pressing the
appropriate number button
while holding the [–] button.

• Only one song revoice param-

eter can be recorded per track.
If you revoice a song while play-
ing back the song, only the last-
entered data will be recorded.

• The REVOICE mode will auto-

matically be exited if the MENU
[

▲

] and [

▼

] buttons are used to

select any of the menus to the
left of the display, or if the
[CARTRIDGE] button is
pressed.

• Since revoicing a user song ac-

tually rewrites the song data,
the revoiced song will remain in
memory as long as a working
set of batteries is installed in the
PSR-530, or the AC adapter is
connected.

REVOICE

Revoicing

If Necessary Select a Track to Revoice

Use the TRACK buttons to select the SONG track you want to revoice:

MELODY 1 … MELODY 4, or ACCOMP. A frame will appear around the icon
of the selected track.

MINUS ONE

MELODY

ACCOM-

PANIMENT

VOICE

MINUS ONE

• The TRACK button below the

selected track can be used to
turn the track on or off. Make
sure that the track is turned on if
you want to monitor the sound
while revoicing.

• The revoicing cannot be ex-

ecuted when the memory space
is almost full with the user
songs.

• When you revoice the user song

data during its playback and exit
from the REVOICE mode, the
song will automatically be
stopped.