VEGA VEGAWELL 52 4 … 20 mA_HART Pt 100 - Manual (Page 11)

4 Mounting
4 .1 General instructions
M
ake sure that all parts of the instrument exposed to the process, in
particular the sensor element, process seal and process fitting, are
suitable for the existing process conditions. These include above all
the process pressure, process temperature as well as the chemical
properties of the medium.
Y ou can find the specifications in chapter "Technical data" or on the
type label.
L ateral movements of the transmitter can cause measurement errors.
F or this reason, mount the instrument in a calm area or in a suitable
protective tube.
T he connection cable has a capillary for atmospheric pressure
compensation. Therefore lead the cable end into a dry environment or
a suitable terminal housing, for example VEGABOX 02 or VEGA-
DIS
62.
Fig. 3: Mounting example: VEGAWELL 52 in a pump shaft with breather housing
VEGABOX 02
Suitability for the pro-
cess conditions
Mounting position
Pressure compensation
Mounting example
VEGAWELL 52 • 4 … 20 mA/HART Pt 11
4 M ounting
35402
-
EN
-111021