VEGA VEGADIS 62 - Manual (Page 32)

Menu section Menu item Default value
Indication range
decimal point 0.000
Filter 0
Alarm -
Alarm On/Off Off
Min. alarm 4.000
Max. alarm 20.000
Min./Max. value
memory -
Delete min./max. dEL
Min./Max. On/Off Off
Configuration Language EnG
Contrast 2
Reset -
USER unit USER
Min. failure mes-
sage 3.6
Max. failure mes-
sage 21.0
A 6-digit user unit can be individually programmed by the user. An
alphanumerical character set is available.
By pushing the [OK] key, the first position is selected, this position
begins to flash. With the arrow keys the requested character can be
selected. By pushing the [OK] key again, the character is confirmed
and the next position is selected.
Setting the current value that triggers the min. failure message when it
is reached or underrun. The min. failure message is shown in the
display with 5 underlines ( _ _ _ _ _ ) and the message "AUSMIN" (or
"OUTMIN"
).
Adjustment range: 3.5 … 3.9
Configuration/USER unit
Configuration/Min. failu-
re message
32 VEGADIS 62
6 Set parameters
36469
-EN
-120329