VEGA VEGAPULS 61 (≥ 2.0.0 - ≥ 4.0.0) Profibus PA - Manual (Page 36)

36
6 Set up with the indicating and adjustment module
VEGAPULS 61 • Profibus PA
36501-EN-121011
– Edit parameter
– Save value
•
[->] key:
– Presentation change measured value
– Select list entry
– Select editing position
•
[+] key:
– Change value of the parameter
•
[ESC] key:
– interrupt input
– Jump to next higher menu
The sensor is adjusted via the four keys of the indicating and adjust-
ment module. The LC display indicates the individual menu items. The
functions of the individual keys are shown in the above illustration.
Approx. 10 minutes after the last pressing of a key, an automatic reset
to measured value indication is triggered. Any values not confirmed
with [OK] will not be saved.
6.3 Parameter adjustment
Through the parameter adjustment the instrument is adapted to the
application conditions. The parameter adjustment is carried out via an
adjustment menu.
The main menu is divided into five sections with the following func-
tions:
Setup: Settings, for example, to measurement loop name, medium,
application, vessel, adjustment, AI FB 1 Channel - scaling - damping
Display: Language setting, settings for the measured value indication
as well as lighting
Diagnosis: Information, for example on the instrument status, pointer,
reliability, AI FB 1 simulation, echo curve
Further settings: Instrument units, false signal suppression, lineari-
zation, sensor address, PIN, date/time, reset, copy sensor data
Info: Instrument name, hardware and software version, calibration
date, instrument features
In the main menu point "Setup", the individual submenu points should
be selected subsequently and provided with the correct parameters
to ensure the optimum adjustment of the measurement. The proce-
dure is described in the following.
Each medium has different reflection properties. With liquids, further
interfering factors are fluctuation product surface and foam genera-
Adjustment system
Main menu
Setup/Medium