VEGA VEGAFLEX 52V - Manual (Page 5)

VEGAFLEX 51V and 52V 5
Pluggable adjustment module MINICOM
Product description / Application features
1.2 Application features
Application features
• Level measurement in solids
• Measurement also in vacuum
• All slightly conductive and all substances
with a dielectric constant
ε
r
> 1,7 can be
measured
• Measuring ranges
VEGAFLEX 51 0 … 10 m
VEGAFLEX 52 0 ... 20 m
Two-wire technology
• Supply, signal transmission and output
signal on one two-wire cable
• digital output signal
• low wiring costs due to the use of bus
systems or two-wire technology
Rugged
• High resistance materials: PA, 1.4401
Exact and reliable
• Resolution 1 mm
• Unaffected by noise, vapours, dusts, gas
compositions and layering
• Unaffected by varying density
• Measurements under pressure up to
16 bar and medium temperatures up to
120
°
C
Communicative
• Integral measured value indication
• Indication either separated from the sensor
• Adjustment from the DCS-level
• Connection to all bus systems:
Interbus S, Modbus, Siemens 3964R,
Profibus DP, Profibus FMS, ASCII
Approvals
Dust-Ex - Zone 10
Adjustment with adjustment module
MINICOM
With the 6-key-adjustment module MINICOM
(3,2␣ cm␣ x␣ 6,7␣ cm) you can carry out the ad-
justment in clear text dialogue.
The adjustment module can be plugged into
VEGAFLEX or into the external indicating
instrument VEGADIS 50.
VEGAFLEX can therefore also be adjusted
from the external indicating instrument
VEGADIS 50.
Adjustment with VEGA signal condi-
tioning instruments
VEGAFLEX-series 50V sensors can be also
operated with a VEGAMET signal condi-
tioning instrument.
The display leads you in clear text. With the
6-key adjustment field the parameter adjust-
ment can be carried out.