VEGA VEGAFLEX 52V - Manual (Page 22)

22 VEGAFLEX 51V and 52V
Set-up / Adjustment structure
4 Set-up
4.1 Adjustment structure
Series 50 sensors can be adjusted
- with PC (adjustment program VVO)
- with detachable adjustment module
MINICOM
- with a signal conditioning instrument
VEGAMET (V)
The sensors can only be adjusted with one of
the possibilities at the same time.
Independent whether you set-up a measur-
ing system (unit of sensor and signal condi-
tioning instrument VEGAMET or sensor and
processing system VEGALOG) with the
adjustment software VVO, with the signal
conditioning instrument or with the adjustment
module MINICOM, the adjustment procedure
is always the same:
-
first of all configure a measuring system
in the menu "
Configuration“ and then
- carry out the parameter adjustment of the
sensors in the menu "
Instrument data“.
Adjustment module MINICOM
With the adjustment module MINICOM you
adjust directly in the sensor or in the external
indicating instrument VEGADIS 50. The ad-
justment module MINICOM enables with the
6-key adjustment field with text display the
adjustment of the sensor in the same function
volume as with the adjustment program VVO.
Signal conditioning instrument
VEGAMET (V)
The signal conditioning instrument VEGAMET
enables with the 6-key adjustment field with
text display the parameter adjustment in the
same function volume as with the adjustment
program VVO on the PC.
Adjustment program VVO
With the adjustment program VVO (VEGA
Visual Operating System) on the PC you
adjust the sensors very comfortably. The PC
communicates via the interface adapter
VEGACONNECT␣ 2 with the sensor. The si-
gnal and supply line is therefore superim-
posed by a digital adjustment signal.
The PC can be connected to any position on
the cable or directly to the sensor.