VEGA VEGAPULS 56 Profibus PA User Manual

Page 48

VEGAPULS 56 Profibus PA

Setup

If the sensor address has been adjusted with
the DIP switch from 1 … 125, the address
number in the field "

Sensor address“ is grey

and cannot be changed at this point.

Create new measurement loop

• Choose the menu "C

onfiguration/Measure-

ment loop/Modify“.

The menu window "

Selection of measurement

loop - Modify meas. loop configuration“
opens.

• Here you choose the sensor to be

configured.

The measurement loops are listed in the
sequence of sensor addresses with a serial
number and any existing name.

• Choose in the window "

Modify meas. loop

configuration“ the application and enter a
name for the measurement loop.

Parameter adjustment 1

In the menu "

Instrument data/Parameter ad-

justment“ you carry out all important sensor
adjustments.

• Choose the menu "

Instrument data/Param-

eter adjustment

eter adjustment“ and then the sensor on
which you want to carry out the parameter
adjustment.

In the opening menu window, you now see
the measurement loop names and descrip-
tions previously entered under "

Create new

measurement loop“. If you have only
configured or connected one sensor, there
will naturally be a choice of only one sensor.