VEGA VEGAPULS 56 Profibus PA - Manual (Page 42)

42 VEGAPULS 56 Profibus PA
S E N S O R D I S P L AY 1 2 3 4 5 6 7 8
ESC ESC + -
OK OK
- +
1 2 C 5 6 7 8 4 3
Commu-
nication + -
4...20mA
Display
1 2 C 5 6 7 8 4 3
VBUS
- +
ESC
OK
Tank 1
m (d)
12.345
Electrical connection
4.4 Connection of the external indi-
cating instrument VEGADIS 50
Loosen the four screws of the housing lid on
VEGADIS 50. The connection procedure can
be facilitated by fixing the housing cover
during connection work with one or two
screws on the right of the housing (figure).
VEGADIS 50
Screws
Input of the
sensor
DISPLAY
(in the lid of the indicating
instrument)
Terminal strip in
VEGADIS 50
Power supply
Adjustment
module
Note:
The four-wire connection cable to VEGADIS
50 should be screened and have a max.
length of 25 m. The digital signals to the indi-
cating instruments would otherwise be im-
paired by the cable capacitance of longer
connection cables. Ground the cable screen
together with the signal cable screen on the
sensor.
M20 x 1.5
(diameter of the
connection cable
5…9 mm)