3 types and versions, Adjustment with hart, Handheld – VEGA VEGAFLEX 51K User Manual
Page 5: Adjustment with pc, Adjustment with adjustment module minicom, Vegaflex series 50 k
VEGAFLEX 51K
5
Adjustment with HART
®
handheld
Series 50 with 4 … 20 mA output signal can
also be adjusted with the HART
®
handheld or
via a PC with HART
®
software (e.g. Smart
version). A special DDD (Data Device De-
scription) is not necessary, so that the sen-
sors can be adjusted with the HART
®
standard menus of the handheld.
-
+
ESC
OK
Tank 1
m (d)
12.345
Detachable adjustment module MINICOM
Product description
Adjustment with PC
The setup and adjustment of the VEGAFLEX
sensors is generally made on the PC with the
adjustment program VEGA Visual Operating
(VVO) under Windows
®
.
The program leads
quickly through adjustment and parameter
setting by means of pictures, graphics and
process visualisations.
The PC can be connected to any individual
position of the system or the signal cable.
This is done by connecting the two-wire PC
interface converter VEGACONNECT 2 to the
sensor or the signal cable.
The adjustment and parameter setting data
can be saved with the adjustment software
on the PC and can be protected by pass-
words. On request, the adjustments can be
quickly transferred to other sensors.
Adjustment with adjustment module
MINICOM
With the small (3.2 cm x 6.7 cm) 6 key adjust-
ment module, the adjustment can be carried
out in clear text dialogue.
The adjustment module can be plugged into
VEGAFLEX or the external indicating instru-
ment VEGADIS 50.
Adjustment of VEGAFLEX from the external
indicating instrument VEGADIS 50 is there-
fore possible.
1.3 Types and versions
VEGAFLEX series 50 K
In general, all VEGAFLEX series 50 K sen-
sors can be adjusted with the pluggable
adjustment module MINICOM or with any
standard HART
®
handheld. With the software
VEGA Visual Operating (VVO), it is also pos-
sible to adjust the sensor with a PC.
4 … 20 mA sensors
Two-wire sensors fro connection to a power
supply unit or a PLC.
Compact sensors with mains supply
The sensors deliver a level-proportional
4 … 20 mA signal, which can be processed
in a PLC.
HART Communicator
HART
®
handheld