VTech DS6670-6C Manual - Manual (Page 68)

64
Answering system settings
Delete your announcement
Press MENU when the phone is not in use.
Press or to scroll to Answering sys, then
press SELECT.
Press SELECT again to choose Announcement.
Press or to scroll to Reset annc, then
press SELECT. The handset displays Reset to default annc?
Press SELECT to delete your recorded announcement.
You hear a confirmation tone. The handset displays
Annc. reset to default and then the system announces,
“Announcement deleted.”
When your announcement is deleted, calls are answered with the
preset announcement.
Answer on/off
The answering system must be turned on to answer and
record messages. When the answering system is turned on,
the ANS ON light on the telephone base turns on and
ANS ON displays on the handset.
To turn on or off at the telephone base:
Press
ANS ON to turn the answering system on or off.
If the answering system is turned on, the telephone base
announces, “ Calls will be answered.” If the answering system
is turned off, the telephone base announces,
“ Calls will not be answered.”
To turn on or off with a handset:
Press MENU when the phone is not in use.
Press or to scroll to Answering sys, then
press SELECT.
Press or to scroll to Answer ON/OFF, then
press SELECT.
Press or to scroll to On or Off, then press SELECT
to confirm. You hear a confirmation tone.
When you turn on the answering system at the telephone base with no memory
capacity left, the answering system announces, “ Memory is full.”
If the remaining recording time is less than three minutes, the handset announces,
“ Less than three minutes to record.” and the handset displays Rec mem low.
1.
2.
3.
4.
5.
1.
2.
3.
4.
•
•
Record memo
>Answer ON/OFF
Play annc
>Reset annc
Reset to
default annc?
Annc. reset
to default
ANSWER ON/OFF
>On