VTech DS6670-6C Manual - Manual (Page 53)

49
Multiple handset use
Answer a PTT call
You can respond to a PTT call whenever the speakerphone light is off, as
described below.
When your handset receives a PTT call, the handset beeps and the screen
displays Press and hold [PTT] to talk.
When the other party is speaking, your speakerphone light is on, and your
handset displays PTT From HS X To HS Y (a maximum of four handset
numbers appear).
When your speakerphone light is off and the screen displays
Press and hold
[PTT] to talk, press and hold PUSH TO TALK on your handset. You will hear a
chirp. Speak towards the handset.
While you are speaking, your handset displays PTT To handset: X
(a maximum of four handset numbers appear).
Your voice is broadcast to all destination handsets.
After speaking, release PUSH TO TALK. Your handset will beep. After the beep, if
your speakerphone light is off, you can press and hold PUSH TO TALK to speak
again or the destination handset can respond.
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT session to an intercom call.
When your handset displays Press and hold [PTT] to talk,
press MENU. The screen displays Intercom.
Press SELECT.
If you have two handsets, your handset displays
Calling other handset. The destination handset temporarily
displays Push to talk Ended and then Other handset
is calling.
If you have three or more handsets, your handset displays
Calling HANDSET Y. The destination handset temporarily
displays Push to talk Ended and then HANDSET X
is calling.
On the destination handset, press /HOME, CELL 1, CELL 2, or any
dialing key ( 0-9 or ) to answer the intercom call. Both handsets now
display Intercom.
To end the intercom call, press OFF or place the handset in the telephone base
or charger. Both screens display Intercom ended.
1.
2.
3.
•
•
1.
2.
•
•
3.
4.
>Intercom
Calling
HANDSET Y