VTech DS6670-6C Manual - Manual (Page 52)

48
Multiple handset use
PTT to multiple handsets
When there are multiple handsets registered to the telephone system, PTT
supports one-to-group calls. PTT supports a maximum of one-to-four calls when
five handsets are registered, and a maximum of one-to-three calls when six or more
handsets are registered. The first four registered handsets will be able to use this
feature. Other handsets can only use PTT for one-to-one calls.
To begin a PTT call to multiple handsets:
Press and hold PUSH TO TALK when the handset is not
in use.
If you have more than two handsets, press
PUSH TO TALK
when the handset is not in use. Press and #, or or
to scroll to Group then press SELECT or PUSH TO TALK.
Your handset displays Connecting to group... for a few seconds.
When the connection is made, all handsets display
Press and hold [PTT] to talk and beep once.
Press and hold
PUSH TO TALK on your handset. A chirp
indicates your microphone is on. Speak towards the handset.
Your voice is broadcast to all destination handsets.
While you are speaking, your handset displays
PTT To handset:
X
.
Release PUSH TO TALK after speaking. All eligible handsets beep once again.
After the handsets beep, you can press and hold PUSH TO TALK to speak again
or the destination handsets can respond (see Answer a PTT call on page 49).
Press OFF to end the PTT call. The handset displays Push to talk Ended for
a few seconds.
-OR-
Place the handset in the telephone base or charger to end the PTT call.
After PUSH TO TALK is released, the PTT call session remains open for a short
time. If no one presses PUSH TO TALK within 10 seconds, the PTT call session
ends automatically.
If PTT is turned off in all destination handsets, the originating handset displays
Not available at this time and returns to idle mode.
1.
•
•
2.
3.
4.
•
•
PUSH TO TALK
>Group
Connecting to
group...