VTech DS6672-4 Manual - Manual (Page 44)

Telephone operation
40
Temporary ringer silencing
When the telephone is ringing, you can temporarily silence the ringer of the
handset, headset or telephone base without disconnecting the call. The next call
rings normally at the preset volume.
To silence the handset ringer:
Press OFF, MUTE or on the handset and it displays
Ringer muted and .
To silence the headset ringer:
Press MUTE on the handset.
To silence the telephone base ringer:
Press /VOL on the telephone base.
Each handset, the headset and the base ring when there is an incoming call unless
the ringer volume of that device is turned off.
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the
phonebook, caller ID log or redial list while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as bank
account numbers or access codes) from the phonebook, caller ID log or redial list.
To access a number from the phonebook while on a call:
Press MENU.
Press or to scroll to Phonebook, then press SELECT.
Press or to scroll to the desired phonebook, then
press SELECT.
Press or to scroll to the desired entry.
Press
SELECT to dial the displayed number.
To access a number from the caller ID log while on a call:
Press MENU.
Press or to scroll to Caller ID log, then press SELECT.
Press or to scroll to the desired entry.
Press
SELECT to dial the displayed number.
To access a number from the redial list while on a call:
Press REDIAL to enter the redial list.
Press , or REDIAL repeatedly to browse to the desired entry.
Press SELECT to dial the displayed number.
Press CANCEL to exit the phonebook, caller ID log or redial list when you are on a call.
•
•
•
1.
2.
3.
4.
5.
1.
2.
3.
4.
1.
2.
3.
Ringer muted
>Home PB
ECO
Mike Smith
800-595-9511
ECO
ECO
Caller ID log
>Phonebook