VTech DS6672-4 Manual - Manual (Page 42)

Telephone operation
38
Volume control
On a handset:
During a call, press VOLUME/ or VOLUME/ to
adjust the listening volume.
On a handset:
During a call, press +/-/VOLUME on the side of the
headset to adjust the listening volume. You hear an in-ear
beep while adjusting. If you turn off the key tone, the in-ear beep will not be heard.
The handset earpiece, headset earpiece and speakerphone volume settings
are independent.
When the volume reaches the minimum or maximum setting, you hear two beeps.
Mute
The mute function allows you to hear the other party but the other party cannot
hear you.
On a handset:
During a call, press MUTE. The handset displays
Muted until the mute function is turned off.
Press
MUTE again to resume the conversation.
The handset displays Microphone ON briefly.
On a headset:
During a call, press MUTE. The headset announces,
“Mute on.” The headset beeps every 30 seconds
until the mute function is turned off.
Press
MUTE again to resume the conversation.
The headset announces, “Mute off.”
Hold
You can place a home or cell call on hold. You will hear an alert tone if you have not
taken the call off of hold after 14 minutes. You will hear another alert tone
30 seconds later. At 15 minutes on hold, the call on hold automatically disconnects.
To place a home call on hold:
Press HOLD. The handset displays Home on hold and /HOME/FLASH flashes.
To resume a home call on hold:
Press /HOME/FLASH.
To place a cell call on hold:
Press HOLD. The handset displays Cell X on hold and the CELL 1 or
CELL 2 key flahses.
To resume a cell call on hold:
Press the corresponding CELL key.
•
•
•
•
•
•
•
•
•
•
•
•