VTech DS6672-4 Manual - Manual (Page 32)

28
Telephone settings
Handset ringer volume
You can set the ringer volume or turn the ringer off on each
handset. When the ringer is off, appears on the screen.
Press MENU when the handset is not in use.
Press or to scroll to Ringers, then press SELECT.
Press SELECT again to select Ringer volume.
Press or to sample each volume level.
Press
SELECT to save your selection and return to the previous
menu. You hear a confirmation tone.
The ringer volume also determines the ringer volume for intercom
calls. If the ringer volume is set to off, that handset is silenced for
all incoming calls except paging tone.
Telephone base ringer volume
Press q/VOL or p/VOL on the telephone base to adjust
the ringer volume when the telephone is not in use.
When you set the base ringer volume to off, the message
window displays 0 and the system announces,
“Base ringer is off.”
When the telephone is ringing, press q
/VOL to
temporarily turn the base ringer off.
Headset ringer volume
The headset does not have an external ringer. When there is an incoming call, the
headset earpiece rings.
To adjust the ringer volume:
Press
+/-/VOLUME on the side of the headset when it is not in use.
1.
2.
3.
4.
5.
Bluetooth
>Ringers
>Ringer volume
Ringer tone
RINGER VOLUME