VTech DS6151 Manual - Manual (Page 25)

21
Answering system settings
Call screening
The call screening feature lets you listen at the telephone base to a caller
leaving a message. You can turn this feature on or off with either your handset
or telephone base. Unless you change it, the call screening feature is preset
to on.
To change the setting:
Using the telephone base:
Press the MENU softkey when the telephone base is
not in use.
Press the
SELECT softkey to select Answering sys.
Press /
CID
or /
DIR
to select Mailbox 1 or Mailbox 2,
then press the SELECT softkey. The corresponding
icon,
1
or
2,
flashes on the screen.
Press /
CID
or /
DIR
to select Ans sys setup, then
press the SELECT softkey.
Press the SELECT softkey to select Call screening.
Press /
CID
or /
DIR
to select On or Off, then press
the SET softkey to confirm your setting or press
CANCEL to exit to the previous menu without making
any changes.
Using the handset:
Press the MENU softkey when the handset is not
in use.
Press the
SELECT softkey to select
ANSWERING SYS.
Press or to select
Mailbox 1 or Mailbox 2, then
press the SELECT softkey. The corresponding icon,
1 or
2,
flashes on the screen.
Press or to select Ans sys setup, then press the
SELECT softkey.
Press or to select
Call screening, then press the
SELECT softkey.
Press or to select
On or Off, then press the
SET softkey to confirm your setting or press the
BACK softkey to exit to the previous menu without
making any changes.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
1
ANS SYS SETUP
Answer ON/OFF
Call screening
Announcement
BACK SELECT
1
BACK SET
CALL SCREENING
On
Off
SELECT
ANSWERING SYS
Mailbox 1
Mailbox 2
SET
1
CALL SCREENING
On
Off
SELECT
Answering sys
Directory
Call log
1
Delete all old
Record memo
Ans sys setup
SELECT
1
Call screening
Announcement
# of rings
SELECT