VTech DS6151 Manual - Manual (Page 17)

13
Handset settings
Home area code
If you dial local calls using only seven digits (area code not required), you can
program your home area code so that when you receive a call within your
local area, the telephone number is automatically stored without the area code
in the call log.
To change the setting:
Press the MENU softkey when the handset is not
in use.
Press or to select
SETTINGS, then press the
SELECT softkey.
Press or to select
Home area code, then press the
SELECT softkey.
Use the dialing keys (
0-9) to enter the desired home
area code. Press OFF to delete a digit.
Press the SET softkey to confirm or press the
BACK softkey to exit to the previous menu.
1.
2.
3.
4.
5.
If, in the future, your telephone service provider requires
you to dial the area code when making a local call, or, if
you move to a location that requires it, delete the home
area code you have already programmed following the
steps above. After you have deleted the home area code,
_ _ _ appears in the display.
BACK SET
HOME AREA CODE
___
SETTINGS
Key tone
Set date/time
Home area code
BACK SELECT
BACK SELECT
SETTINGS
Dial mode
The dial mode is preset to tone. If you do not have touch-
tone service, you need to change the setting to pulse.
To change the setting:
Press the MENU softkey when the handset is not
in use.
Press or to select
SETTINGS, then press the
SELECT softkey.
Press or to select
Dial mode, then press the
SELECT softkey.
Press or to choose
Tone or Pulse. Press the
SET softkey to save, or press the BACK softkey to
exit to the previous menu.
1.
2.
3.
4.
SETTINGS
Set date/time
Home area code
Dial Mode
BACK SELECT
BACK SELECT
SETTINGS
BACK SET
DIAL MODE
Tone
Pulse