VTech SN6197_-2 Abridged manual - Manual (Page 64)

58
Answering system operation
Remote access
A two-digit security code is required to access the answering system
remotely from any touch-tone telephone. The preset code is 19.
Dial your telephone number from any touch-tone telephone.
Enter the two-digit security code after the announcement and the
long beep.
The system announces, “
Press star for reminder or press pound to
listen to messages.” Press or
#
.
After pressing , you can enter one of the following
remote commands:
Command Function
1 Review reminders.
2 Set reminders.
3 End the call.
4 Turn reminder off.
-OR-
After pressing # , you can enter one of the following
remote commands.
Command Function
1 Play all messages.
2 Play new messages.
3 Delete the current message (during playback).
33 Delete all old messages.
4 Repeat the current message (during playback).
5 Stop.
*5 Hear a list of remote commands.
6 Skip to the next message (during playback).
*7 Record a new announcement.
8 End the call.
0 Turn the answering system on or off.
1.
2.
3.
•
•