VTech SN6197_-2 Abridged manual - Manual (Page 15)

Getting started
9
Expand your telephone system
Your telephone base can support up to 12 handsets/pendants. Each
device must be registered to the telephone base before use.
You can add new handsets (
SN6107, purchased separately) and
new pendants ( SN6166/SN6167, purchased separately) to your
telephone base. Additional handsets are assigned numbers in the
sequential order.
Add and register a handset
When first purchased, each expansion handset shows To register HS,
see manual. The new handset should be charged without interruption
for at least 30 minutes before registering it to the telephone base.
Make sure the handset is out of the handset charger and is put near
the telephone base. Make sure the handset shows To register HS,
see manual before you begin registration.
To register a handset:
Press MENU on the telephone base
when idle.
Scroll to
Settings, then press SELECT .
Scroll to Registration, then press SELECT .
The telephone base shows Registering...
Please wait.
Press
QUIET
#
on the cordless handset. The
handset shows Registering... Please wait.
Then HANDSET Registered appears on the
cordless handset and the telephone base,
and both devices beep. The handset is now
registered with the telephone base. It takes up
to 60 seconds to complete registration.
If registration fails, the telephone base
displays Registration failed. Start again from Step 1 above.
1.
2.
3.
4.