VTech SN6197_-2 Abridged manual - Manual (Page 32)

26
Telephone settings
Home area code
If you dial your local calls using only seven digits (area code not
required), you can program your home area code so that when
you receive a call within your local area, the telephone number is
automatically stored without the area code in the caller ID log.
Press MENU when idle.
Scroll to Settings, then press SELECT on the cordless handset/
SELECT on the telephone base.
Scroll to Home area code, then press SELECT on the cordless
handset/ SELECT on the telephone base.
Enter a three-digit home area code, then press SELECT on the
cordless handset/ SAVE on the telephone base.
Dial mode
The dial mode is preset to touch-tone dialing. If you have pulse (rotary)
service, you must change the dial mode to pulse dialing before using
the telephone to make a call.
Press MENU when idle.
Scroll to Settings, then press SELECT on the cordless handset/
SELECT on the telephone base.
Scroll to Dial mode, then press SELECT on the cordless handset/
SELECT on the telephone base.
Scroll to select Touch-tone or Pulse, then press SELECT on the
cordless handset/ SELECT on the telephone base.
1.
2.
3.
4.
1.
2.
3.
4.