Telephone number setting on monitor – V-Tech DT-TPC Manual User Manual
Page 7
Touch screen monitors:
Button operation monitors:
Note:
4.Telephone Number Setting on Monitor
• There are 3 types of divert modes:
• 1:Don't divert calls----calls from outdoor station will not be diverted.
• 2:Divert if not answered----outdoor station calls indoor monitor firstly,if nobody
answer the call within 25 seconds,the call will be diverted to the telephone number
you set. At this mode,the monitor will shut off immediatelly when TPC deverts
sucessfully,while it won't affect the communication between TPC and outdoor station.
Otherwise, the monitor can do the operation of monitoring,talking,and unlocking.
• 3:Divert simutaneously----calls from outdoor station will be diverted to your telephone
immediately.At this mode,the monitor won't shut off when TPC deverts sucessfully,but
if the monitor answers the call at this time,TPC will quit absolutely.
Exit&Save
Exit&Unsave
-Telephone Number-
1> _
2> _
3> _
Don’t divert calls
Divert if not answered
Divert simultaneously
1
2
3
4
5
6
9
8
7
*
0
#
TPC configure
1) 0
2)
3)
4)Divert mode select: 2
0:Not 1:Not Answer 2:Simulateously
Cancel
Edit
Save&Exit
• Maximum 3 telephone numbers can
be set,touch the telephone number
frame,then input the the number by
touching the digital keypad.
• Maximum 3 telephone numbers can
be set,Use ▲ /▼ Button to move
upward / downward to select the
item,then press the MENU button to
edit.Use ▲ / ▼ Button to increase /
decrease the value,and use button
to input next digital,use button to
button to cancel the input. press the
MENU button again to finish the edit
operation.
6