V-Tech DT-TPC Manual - Manual (Page 5)

3.2 SW501 switches settings:
Villa application:
Apartment application:
Total 6 bits for SW501 switches. Bit-6 must be set to OFF in villa system.
Total 6 bits for SW501 switches. Bit-6 must be set to ON in apartment system.
To villa application,just Bit-1 is useful,Bit2 to Bit5 are invalid.
Bit state Discription
Application for villa
Bit state Discription
Application for apartment
Bit state Discription
TPC just is a monitor that its user code is 15,besides,the
monitors with its user code from 00 to 14 can be read and
written,but you should know that the divert mode will be
adopted from the monitor with its user code 00
TPC just is a monitor that its user code is 31,besides,the
monitors with its user code from 16 to 30 can be read and
written,but you should know that the divert mode will be
adopted from the monitor with its user code 16
1 2 3 4 5 6
ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
ON
ON(1)
=
OFF(0)
=
ON ON
ON(1)
=
OFF(0)
=
ON ON
4