Veris Technologies Quad 1000 Soil EC Mapping System - Operating Instructions User Manual

Page 39

Text mode
Original mode

OM17-Quad1000

6-18

9. Then you can see the following messages in sequence.

Figures 6.4 a and b.
10. Do not shut off the power, but repeat from step 5 to 9 again.

11. Press the RESET button or shut off and turn back on the power.

12. Check the LCD display. If nothing shows up in the LCD, or if display doesn’t contain the new
firmware version number, please repeat from step 1 to 11.