Veris Technologies NIRS Spectrophotometer - QUICK REFERENCE CARD User Manual
Page 2
9. Before mapping complete all steps above. Make sure
Reference Check (Ref Check) light is green, all Auxiliary
Case lights are green, and GPS data are being received.
11. Begin mapping: Pressing LOG button or ESC key stores
spectrum data and auxiliary data, which includes EC data,
until LOG button or ESC key has been pressed again. GPS
and Log lights must be green for data to be recorded.
10. Set depth
of EC coulters
approximately
1.5“ in soil.
Make sure the
implement
frame is level.
12. Pull forward
with shank in
ground. The
absorbance
should not rise
more than 0.1. If
absorbance
jumps more than
0.1, readjust
shank so it tilts
back slightly, and
retest.