Velleman projects K6714 Assembly instructions - Manual (Page 10)

10
C onnect the phase to “0” and the Neutral to “125” or “220”, depending on the
mains voltage.
N
ormally the POWER ON LED should be lit now.
In case no manual operation has been provided, you can test the relay by
connecting the inputs (terminals 1 trough 16) to earth (GND) one after another.
Connections possibility's :
1.
Connect the board to the 15 channel receiver K6711 (see Fig. 1.0)
FIG 1.0
17. TEST AND CONNECTIONS :
Test and connections