Velleman projects K6714-16 Assembly instructions - Manual (Page 2)

2
Features & specifications
Features :
The relays can be controlled in different ways : direct control from open-
collector outputs, TTL or CMOS level or trough other kits (K6711, K8000,
K8023,…)
Every output of the print can be equipped with a noise suppressor network.
Output 12V CC can be used as a power supply for other kits: K6711,
K8023,...
Specifications
• Power supply:.................................................... 230 or 125VAC max. 12VA.
• Output voltage: ...........................................................................12V/250mA.
• Relay switch-over contact: ................................................. max. 5A at 220V.
• PCB dimensions:..................................................150 x 212mm (5.9" x 8.4")
H67146(16)IP'1_rev1.pub
page 2
Composite
Tuesday, August 25, 2009 12:14