Velleman projects EDU09 Assembly instructions User Manual

Page 9

- 9 -

Construction

LED

LD1 : red

LD1

CATHODE

STEP 1: Mount the LED.
Do not solder yet.

STEP 2: Assemble the unit but do not yet tighten
the bolts. Position the LED so that it stays just below
the cover plate.

STEP 5: Disassemble the unit.

25mm M3 bolts

Carton cover

15mm M4 spacers

25mm M3 bolts

Carton cover

15mm M4 spacers

STEP 3: Turn the unit 180°

STEP 4: Solder one lead and check the
position. If OK, solder the second
connection.

SOLDER