Ii. software installation, Mounting the test leads – Velleman projects EDU09 Assembly instructions User Manual

Page 10

- 10 -

Assembly

II. SOFTWARE INSTALLATION

Step 1: Download the EDU09 software on our website: www.vellemanprojects.eu

Step 4: Accept the license argeement

Mounting the test leads

STEP 1: Cut off the banana plug from the test
leads.

STEP 3: Solder the wires.

Tip:

Start with one cable and then do the other.

Step 5: Solder the cables on the PCB.

STEP 2: Strip both cables
and twist the wire ends of each
cable.

STEP 4: Mount both cables as shown in the
drawing.

Step 2:

open the file en select the software.

Step 3: Select “next” to begin the installation
procedure.

Step 5: Select the destination on your PC

STEP 2: Strip both cables
and twist the wire ends of each
cable.